ST-SP Pag.
36 Rev 02 05/13
UK
G
RAPHIC SYMBOLOGY USED TO INDICATE THE NEED FOR INDIVIDUAL PROTECTION DEVICES
This paragraph indicates the graphic symbols used in this handbook to indicate the need to wear certain IPD.
Indicates the need to use suitable head protection to conduct the operation described.
Indicates the need to use suitable protective gloves to conduct the operation described (possibly
dielectric to conduct electrical system intervention).
Indicates the need to use suitable protective clothing to conduct the operation described.
Indicates the need to use suitable safety footwear to conduct the operation described.
Indicates the need to use suitable protective goggles to conduct the operation described.
1.5 Warranty
1.5.1 General Conditions
The manufacturer, R
IVACOLD SRL
, guarantees the B
LOCKSYSTEM SERIES
ST-SP and its equipment manufactured by the same
manufacturer as being free of material and manufacturing defects for a period agreed and stipulated in the sales contract of the
MACHINE
.
1.5.2 Parts excluded from warranty
The warranty excludes pieces that wear and all consumable tools and materials possibly supplied by the manufacturer with the
MACHINE
.
1.5.3 Responsibility of the User
The client is responsible for:
electrical system set-up;
consumable tools and materials.
1.5.4 Operations causing warranty invalidity
Any attempt to dismantle, modify or tamper with a
MACHINE
component by the user or by unauthorised staff leads to the warranty
becoming invalid and removes the manufactured from any responsibility regarding possible damage to persons or property
deriving from such tampering.
The manufacturer is also removed from possible responsibility and the warranty is invalid for the
MACHINE
in the following cases:
unplanned use of the
MACHINE
(see
Paragraph 3.7 – Proper and improper use of the machine
Chapter 3 – Safety and
Technical Data
);
use contrary to requisites in norms in force in the country of use;
installing the
MACHINE
in conditions other than those specified in
Chapter 4 – Transport and Installation
;
connections non-conforming to specifications reported in
Chapter 4 – Transport and Installation
;
use of work equipment other than those specified in
Chapter 5 – Machine Use
and in
Chapter 6 – Maintenance and
Demolition
;
total or partial non-compliance with the instructions reported in this handbook;
no or incorrect maintenance;
use of non-original parts or those not specified by the manufacturer.
