6 | Operation
RINCO ULTRASONICS AG
82 / 137
BA_Standard3000_GB_V5.1_36566
Analysis (PIN)
For analysis purposes in the case of defective machine functions.
However, no settings are possible.
Block
Access Description
Cycle analysis
Display of the switch and measurement
parameters
Cycle phases
Time and travel-related graph of all cycle
phases in their switching torques.
Press status
Displays the switching and position states of all
switch and measurement elements of the
welding press.
Inputs
Analysis of the signal inputs (STO_2.1)
Outputs
Analysis of the signal outputs (STO_2.2)
Tab. 20:
Analysis (PIN)
Reset functions (PIN)
Resetting all settings to their default values.
Block
Access Description
PIN reset
Sets the PIN to "internal" and enables the
standard PIN codes
Generator reset
Initialises the generator to the standard set-
tings.
Default (data set)
Data set deletes all data sets and creates a
new data set "0".
Statistics reset
Resets the statistics and measurements
database.
Default settings
Resets all of the above settings.
Tab. 21:
Reset functions (PIN)
6.3.2.2
6.3.2.3
