5 | Assembly and initial start-up
RINCO ULTRASONICS AG
62 / 137
BA_Standard3000_GB_V5.1_36566
Connecting
Electrical connections
▪ Work on the electrical system may only be carried out by electrically
qualified personnel.
▪ If work is performed on live ADG generators, the following applicable
national accident prevention regulations (in Germany e.g. GBV A 3
Accident Prevention Regulation Electrical Equipment and Operating
Materials) must be observed.
▪ Only use a grounded mains connection. The ADG generator may never
be operated without a protective conductor connection.
▪ The electrical installation must be carried out according to the applicable
regulations (e.g. cable cross sections, fuses, PE connections).
▪ Comply with EMC directives (shielding, grounding, filter and leads).
WARNING
Incorrect connected loads.
Damage to insulation or individual components.
Contact with live parts.
Risk of electrocution!
• In case of damaged insulation, disconnect the power supply
immediately and have it repaired.
• Before connecting the machine to the power supply,
compare the specifications in "Technical Data" with those of
the grid and only connect if they are identical.
Work on electrical equipment may only be performed by
electrically qualified persons.
• Never remove or insert the generator slide-in module when
connected to the power supply.
▪ Only use a grounded mains connection.
5.4
5.4.1
