RINCO ULTRASONICS AG
Safety requirements | 2
BA_Standard3000_GB_V5.1_36566
19 / 137
Emergency shutdown
The machine must be shutdown immediately in the event of imminent
danger to the user or damage to the press.
– Press the EMERGENCY STOP button (1).
ð
The press returns to the start position.
ð
The system is switched off from the mains.
After the EMERGENCY STOP button has been pressed, turn or pull (depen-
ding on the model) the button to reset it so that the machine can be switched
on again.
WARNING
Uncontrolled switching on.
Danger of severe injury!
• Before switching on the machine again, make sure that the
cause of the EMERGENCY STOP has been rectified and
all the safety mechanisms are installed and functioning
properly.
• Only reset the EMERGENCY STOP button when there is
no more danger.
What to do in the event of danger or
accidents
Preventative measures
First-aid equipment (first-aid kits, blankets, etc.) and an adequate number of
suitable fire extinguishes must be kept within easy access.
▪ Familiarise personnel with the internal emergency plan.
Measures in the event of accidents
▪ Switch off the system with the EMERGENCY STOP button.
▪ Turn off the main switch.
▪ Notify a doctor.
Perform first aid.
▪ Switch off the system with the EMERGENCY STOP button.
▪ Turn off the main switch.
▪ Notify the Technical Customer Service of RINCO ULTRASONICS AG.
▪ Extinguish fire using a suitable fire extinguisher.
▪ Notify works or local fire service.
▪ Notify the Technical Customer Service of RINCO ULTRASONICS AG.
2.6
Fig. 2:
EMERGENCY STOP button
2.7
2.7.1
2.7.2
Electric shock
Smoking, unusual noises, unusual
heat build-up
Fire in the electrical unit