RF627, RF627Smart [Revision 2.1.2] 20.09.2021
Laser Scanners
69
“Angle tolerance”, deg
0...45
The maximum permissible angle between two
segments forming a difference in height.
“Min step” = 5 mm
“Angle tolerance” = 35°
“Min step” = 10 mm
“Angle tolerance” = 35°
“Min step” = 10 mm
“Angle tolerance” = 30°
“Min step” = 5 mm
“Angle tolerance” = 45°
Outputs:
“edge”
SDT_SEGMENT The segment corresponding to the height difference.
“segment detector” - searching for a line segment on the profile. It is performed from left to
right (from negative X values to positive X values).
Parameters: “Mode”
first
The leftmost segment.
last
The rightmost segment.
by index
The segment with the index specified by the “Index”
parameter.
rise edge
The central segment of the "edge" with the "Rise"
height difference.
fall edge
The central segment of the "edge" with the "Fall"
height difference.
first, constr.
The first segment that simultaneously satisfies the
conditions of the parameters “Min len”, “Max len”,
“Angle” and “Angle tolerance”.
last, constr.
The last segment that simultaneously satisfies the
conditions of the parameters “Min len”, “Max len”,
“Angle” and “Angle tolerance”.
first
last
by index, “Index” = 2
by index, “Index” = 3
