124
Laser Scanners
RF627, RF627Smart [Revision 2.1.2] 20.09.2021
#
Description
Screenshot
5
In the "Relative constraints"
section of element 3, add a
constraint of the "Angle" type.
6
Select the added constraint in
the "Relative constraints" list and
specify the target angle and
tolerance.
Adding constraints for element 4
1
Reset the previous selection.
Select segment 4 - in this case,
it will become the main element.
2
In the "Self constraints" section
of element 4, add a constraint of
the "Length" type.
3
Select the added constraint in
the "Self constraints" list and
specify the minimum and
maximum length of the segment.
Adding variants
