Riftek RF627 Series, User Manual, Page: 123 / 130

RF627, RF627Smart [Revision 2.1.2] 20.09.2021
Laser Scanners
123
# Description Screenshot
Adding constraints for element 3
1 Reset the previous selection.
Select segment 3 - in this case,
it will become the main element.
2 In the "Self constraints" section
of element 3, add a constraint of
the "Length" type.
3 Select the added constraint in
the "Self constraints" list and
specify the minimum and
maximum length of the segment.
4 Reset the previous selection.
Select segment 3 and then
immediately select segment 4 -
in this case, it will become a
relative element.