RF627, RF627Smart [Revision 2.1.2] 20.09.2021
Laser Scanners
115
32.3.2.2.2. Relative constraints
Relative constraints are applied only to a pair of elements and are set from the main
element to the relative one. The following relative constraints are provided:
Distance
The shortest distance from the end point of the main element to the start point of the
relative element:
Parameters:
·
min - minimum allowable distance;
·
max - maximum allowable distance.
Angle
The angle between the main and relative elements (the direction of the main element at the
beginning of the relative element is indicated when the angle is denoted by a green line):
