122
Laser Scanners
RF627, RF627Smart [Revision 2.1.2] 20.09.2021
#
Description
Screenshot
Adding constraints for element 2
1
Reset the previous selection by
clicking in an empty area (which
does not contain any elements of
profile approximation).
Select segment 2 - in this case,
it will become the main element.
2
In the "Self constraints" section
of element 2, add a constraint of
the "Length" type.
3
Select the added constraint in
the "Self constraints" list and
specify the minimum and
maximum length of the segment.
4
Reset the previous selection.
Select segment 2 and then
immediately select segment 3 -
in this case, it will become a
relative element.
5
In the "Relative constraints"
section of element 2, add a
constraint of the "Angle" type.
6
Select the added constraint in
the "Relative constraints" list and
specify the target angle and
tolerance.
