149
2
+(L)
3
*(M)
1
+(H)
4
Equation: 2+ (3*(1+4))
Result: 17
V1
Operator1
V2
Operator2
V3
Operator3
V4
100
-(H)
25
/(L)
2
+(M)
1
Equation: (100 – 25) / (2 + 1)
Result: 25
5.5.31 Analog math error detection
Fashion:
Classic:
Short Description
The analog math error detection block sets an output if an error has occurred in the referenced analog
math function block.
Connection
Description
Input
EN
Enable the analog math error detection function block.
Input
R
Reset the output
Parameter
Referenced FB:
block number of an analog math instruction
Error to detect:
Zero division, Overflow, or Zero division OR Overflow.
Auto Reset:
Reset the output when the failure condition clears.
Output
AQ
Q is set high if the error to detect occurred in the last execution of the
referenced analog math function block.
Parameter Referenced FB
The value for the Referenced FB parameter references the block number of an already-programmed
analog math function block.
Description of the function
The analog math error detection block sets the output when the referenced analog math function block
has an error. You can program the function to set the output on a zero division error, an overflow error,
or when either type of error occurs.
If you select the automatically reset check box, the output is reset prior to the next execution of the
function block. If not, the output retains its state until the analog math error detection block is reset with
the R parameter.
In any scan cycle, if the referenced analog math function block executes before the analog math error
detection function block, the error is detected in the same scan cycle. if the referenced analog math
Summary of Contents for ELC-12AC-R-N
