Rievtech ELC-12AC-R-N, User Manual

Page: 43 / 393

43
Brief introduction on 5 options of function page:

Run/stop
Select this menu to switch over xLogic status between RUN and Stop. Refer to
chapter4.3.1 for details.

Set Param
To set function block parameter. Refer to chapter 4.3.2 for details.

Set…
Used to set /modify password ,set address of CPU&extension , LCD settings and
communication parameters settings refer to chapter 4.3.3 and 4.3.4 for details
please.
1. ”Press ”UP” or “DOWN” key to move the cursor to “
Set… .”
2. Then press OK key ,xLogic will display as follows:

Clock
To set and modify date and time .Refer to chapter 4.3.5 for details.

Menu Language
To change the language of the Menu. Refer to chapter 4.3.6 for detail

Network
（
This only for Ethernet CPU)
Recovery ET: when you press ok when the cursor stay on this menu, the Ethernet modem
built-in Ethernet CPU will be reset to default settings.