4
prevent damage to property. The notices referring to your personal safety are highlighted in the manual
by a safety alert symbol; notices referring to property damage only have no safety alert symbol. The
notices shown below are graded according to the degree of danger.
Caution
Indicates that death or severe personal injury may result if proper precautions are
not taken
Caution
With a safety alert symbol indicates that minor personal injury can result if proper
precautions are not taken.
Caution
Without a safety alert symbol indicates that property damage can result if proper
precautions are not taken.
Attention
Indicate that an unintended result or situation can occur if the corresponding
notice is not taken into account.
If more than one degree of danger is present, the warning notice representing the highest degree of
danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a
warning relating to property damage.
Qualified Personnel
The device/system may only be set up and used in conjunction with this documentation. Commissioning
and operation of a device/system may only be performed by qualified personnel. Within the context of
the safety notices in this documentation qualified persons are defined as persons who are authorized to
commission, ground and label devices, systems and circuits in accordance with established safety
practices and standards. Please read the complete operating instructions before installation and
commissioning.
Rievtech does not accept any liability for possible damage to persons, buildings or machines, which occur
due to incorrect use or from not following the details.
Summary of Contents for ELC-12AC-R-N
