Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 714 / 856

007
Delivery Server Retry Times [0 to 255 / 0 / 1 /step]
Sets the number of retry attempts when the delivery server fails to acquire the delivery server
address book.
008
Delivery Server Maximum Entries
[2000 to 50000 / 2000 / 1/
step]
Sets the maximum number account entries of the delivery server user information managed
by UCS.
010
LDAP Search Timeout [1 to 255 / 60 / 1 /step]
Sets the length of the timeout for the search of the LDAP server.
040
Addr Book Migration (SD => HDD)
Not used in this machine.
041
Fill Addr Acl Info.
This SP must be executed immediately after installation of an HDD unit in a basic machine
that previously had no HDD. The first time the machine is powered on with the new HDD
installed, the system automatically takes the address book from the NVRAM and writes it
onto the new HDD. However, the new address book on the HDD can be accessed only
by the system administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically.
5. However, at this point the address book can be accessed by only the system
administrator or key operator.
6. Enter the SP mode and do SP5846 041. After this SP executes successfully, any user
can access the address book.
8. Appendix: SP Mode Tables
358
8