manualshive.com logo in svg

Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 557 / 856

Share
Download
Ricoh MPC 2800 AT-C2 Field Service Manual Download Page 557

006

Page: Stand-By: BW

*ENG

[0 to 999 / 100 / 1 page/step]

Adjusts the threshold of the line position adjustment for BW printing mode in stand-by mode.
The line position adjustment is done when the number of outputs in BW printing mode reaches
the value specified with this SP and the condition of SP2-193-008 or SP2-193-009 is
satisfied.

007

Page: Stand-By: FC

*ENG

[0 to 999 / 100 / 1 page/step]

Adjusts the threshold of the line position adjustment for BW printing mode in stand-by mode.
The line position adjustment is done when the number of outputs in color printing mode
reaches the value specified with this SP and the condition of SP2-193-008 or SP2-193-009
is satisfied.

008

Temp.

*ENG

[0 to 100 / 5 / 1deg/step]

Adjust the temperature change threshold for the line position adjustment (Mode b: adjustment
once). The timing for line position adjustment depends on the combinations of several
conditions. Section Descriptions" section.

009

Time

*ENG

[1 to 1440 / 300 / 1 minute/step]

Adjust the time threshold for the line position adjustment (Mode b: adjustment once). The
timing for line position adjustment depends on the combinations of several conditions.

010

Magnification

*ENG

[0 to 10 / 1 / 0.01%/step]

Adjusts the magnification threshold for line position adjustment. If the length of the main scan
is changed by this amount since the previous MUSIC, then MSUIC is done again.

011

Temp. 2

*ENG

[0 to 100 / 10 / 1deg/step]

Adjust the temperature change threshold for the line position adjustment (Mode a: adjustment
twice). The timing for line position adjustment depends on the combinations of several
conditions.

012

Time 2

*ENG

[1 to 9999 / 600 / 1 minute/step]

Adjust the time threshold for the line position adjustment (Mode a: adjustment twice). The
timing for line position adjustment depends on the combinations of several conditions.

013 Page: Power ON:BW+FC

*ENG

[0 to 999 / 200 / 1 page/step]

2194

[MUSIC Execution Result] Line Position Adjustment: Execution Result

001 Year

*ENG

[0 to 99 / 0 / 1 year/step]

System Service Mode

201

8

Summary of Contents for MPC 2800 AT-C2

























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments