Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 531 / 856

007 Duplex Trail. M Size *ENG [0 to 4 / 0.8 / 0.1 mm/step]
008 Duplex Trail. S Size *ENG [0 to 4 / 0 / 0.1 mm/step]
009 Duplex Left Edge *ENG
[0 to 1.5 / 0.3 / 0.1 mm/step]
010 Duplex Right Edge *ENG
011 Duplex Trail. L Size:Thick *ENG [0 to 4 / 1 / 0.1 mm/step]
012 Duplex Trail. M Size:Thick *ENG [0 to 4 / 0.8 / 0.1 mm/step]
013 Duplex Trail. S Size:Thick *ENG [0 to 4 / 0.6 / 0.1 mm/step]
014 Duplex Left Edge:Thick *ENG
[0 to 1.5 / 0.3 / 0.1 mm/step]
015 Duplex Right Edge:Thick *ENG
2105 [LD Power Adj.] (Process Speed, Color)
Adjusts the LD power of each color for each process speed.
Each LD power setting is decided by process control.
High Speed: 154 mm/sec, Middle Speed: 111 mm/sec,
Low Speed: 77 mm/sec
001 High Speed: Bk *ENG
[50 to 120 / 100 / 1%/step]
Decreasing a value makes lines thinner on the
output.
Increasing a value makes lines thicker on the
output.
002 High Speed: M *ENG
003 High Speed: C *ENG
004 High Speed: Y *ENG
005 Middle Speed: Bk *ENG
006 Middle Speed: M *ENG
007 Middle Speed: C *ENG
008 Middle Speed: Y *ENG
009 Low Speed: Bk *ENG
010 Low Speed: M *ENG
011 Low Speed: C *ENG
012 Low Speed: Y *ENG
System Service Mode
175
8