Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 627 / 856

001 K2: Upper *ENG [0 to 1 / 0.32 / 0.01 /step]
002 K2: Lower *ENG [0 to 1 / 0.22 / 0.01 /step]
003 K5: Upper *ENG [0 to 10 / 5 / 0.01 /step]
004 K5: Lower *ENG [0 to 1 / 0.5 / 0.01 /step]
005 Kn: Lower *ENG [0 to 1 / 0.1 / 0.01 /step]
006 Kn: Upper *ENG [0 to 1 / 1 / 0.01 /step]
007 K5 Edit Point *ENG [0 to 1 / 0.15 / 0.01 /step]
008 K5 Target Voltage *ENG [0 to 5 / 1.63 / 0.01 V/step]
009 K5 Approximate Method *ENG
[0 to 1 / 1 / 1 /step]
0:Linear, 1: Curve
010
K2: Upper/Lower Limit
Coefficient 1
*ENG [0 to 1 / 0 / 0.01 /step]
011 K2: Upper Limit Correction *ENG [–0.2 to 0.4 / 0.07 / 0.01 /step]
012 K2: Lower Limit Correction *ENG [–0.2 to 0.4 / –0.07 / 0.01 /step]
013 Diffusion Correction: M *ENG
[0.75 to 1.35 / 1 / 0.01 /step] 014 Diffusion Correction: C *ENG
015 Diffusion Correction: Y *ENG
016 K2: Check: M *ENG
[0 to 1 / 0.25 / 0.001 /step] 017 K2: Check: C *ENG
018 K2: Check: Y *ENG
3363 [ID Pattern Timing Setting] DFU
001 Scan YCMBk *ENG
Adjusts the detection timing for the process
control pattern.
[-500 to 500 / 13.7 / 1 mm/step]
002
Paper Transfer Release Start
Time
*ENG
Adjusts the timing when the paper transfer unit is
kept away from the image transfer belt.
[0 to 2500 / 0 / 1 msec/step]
System Service Mode
271
8