Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 38 / 856

• You must select one of the counter methods (developments/prints) in accordance with the contract
(
*
SP5-045-001).
Item SP No. Function Default
Counting
method
SP5-045-001
Specifies if the counting method used in
meter charge mode is based on
developments or prints. NOTE: You can
set this one time only. You cannot change
the setting after you have set it for the first
time.
“0”: Developments
A3/11" x 17"
double
counting
SP5-104-001
Specifies whether the counter is doubled
for A3/11" x 17" paper. When you have
to change this setting, contact your
supervisor.
“No”: Single
counting
Service Tel.
No. Setting SP5-812-001
through 004
5812-002 programs the service station
fax number. The number is printed on the
counter list when the meter charge mode
is selected. This lets the user fax the counter
data to the service station.
Settings for @Remote Service
• Prepare and check the following check points before you visit the customer site. For details, ask the
@Remote key person.
Check points before making @Remote settings
1. The setting of SP5816-201 in the mainframe must be "0".
2. Device ID2 (SP5811-003) must be correctly programmed.
• 6 spaces must be put between the 3-digit prefix and the following 8-digit number (e.g.
xxx______xxxxxxxx).
• ID2 (SP5811-003) and the serial number (SP5811-001) must be the same (e.g. ID2:
A01______23456789 = serial No. A0123456789)
3. The following settings must be correctly programmed.
• Proxy server IP address (SP5816-063)
• Proxy server Port number (SP5816-064)
• Proxy User ID (SP5816-065)
2. Installation
36
2