Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 633 / 856

002 Job End: Potential Control: FC *ENG [0 to 2000 / 200 / 1 page/step]
003 Interrupt: Potential Control: BW *ENG [0 to 2000 / 500 / 1 page/step]
004 Interrupt: Potential Control: FC *ENG [0 to 2000 / 200 / 1 page/step]
3516
[Refresh Mode] DFU
While making prints with low coverage, the developer is agitated with less toner consumption
and the toner carrier attraction tends to increase. This may cause low image density or poor
transfer (white dots). To prevent this, the coagulated toner or overcharged toner has to be
consumed by performing the refresh mode.
001 Dev. Motor Rotation: Display: Bk *ENG
[0 to 1000 / 0 / 0.1 m/step]
002 Dev. Motor Rotation: Display: M *ENG
003 Dev. Motor Rotation: Display: C *ENG
004 Dev. Motor Rotation: Display: Y *ENG
005 Rotation Threshold *ENG [0 to 1000 / 1 / 1 m/step]
006 Pixel Coverage Sum: Bk *ENG
[0 to 65535 / 0 / 1 cm
2
/step]
007 Pixel Coverage Sum: M *ENG
008 Pixel Coverage Sum: C *ENG
009 Pixel Coverage Sum: Y *ENG
010 Required Area: Bk *ENG
011 Required Area: M *ENG
012 Required Area: C *ENG
013 Required Area: Y *ENG
014 Refresh Threshold: Bk *ENG
[0 to 255 / 14 / 1 cm
2
/m/step]
015 Refresh Threshold: M *ENG
016 Refresh Threshold: C *ENG
017 Refresh Threshold: Y *ENG
System Service Mode
277
8