Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 683 / 856

5515
[SC/Alarm Setting] *CTL -
With NRS (New Remote Service) in use, these SP codes can be set to issue an SC call when
an SC error occurs. If this SP is switched off, the SC call is not issued when an SC error
occurs.
001 SC Call
[0 or 1 / 1 / - ]
0: Off
1: On
002 Service Parts Near End Call
003 Service Parts End Call
004 User Call
006 Communication Test Call
[0 or 1 / 1 / - ]
0: Off
1: On
007 Machine Information Notice
008 Alarm Notice
009 Non Genuine Toner Alarm
010 Supply Automatic Ordering Call
011 Supply Management Report Call
012 Jam/Door Open Call
5516 [Individual PM Part Alarm Call] *CTL -
001 Disable/ Enable Setting
Enables or disables the PM part alarm call.
[0 or 1 / 1 / - ]
0: Not Send, 1: Send
5610 [Base Gamma Control Point: Command]
004
Factory Setting - -
Recalls the factory settings.
005
Restore - -
Overwrites the current values onto the factory settings.
006
Restore - -
Recalls the previous settings.
System Service Mode
327
8