Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 647 / 856

4020 [Dust Check]
001 Detection: ON/OFF *ENG
Turns the ADF scan glass dust check on/ off.
[0 or 1 / 0 / 1 /step]
0: OFF, 1: ON
002 Dust Detect: Level *ENG
Selects the detect level.
[0 to 8 / 4 / 1 /step]
0: lowest detection level
8: highest detection level
003 Correction Level *ENG
Selects the level of the sub scan line correction
when using the ARDF.
[0 to 4 / 0 / 1 /step]
0: Off
1: Weakest
2: Weak
3: Strong
4: Strongest
4301
[APS Operation Check]
Displays a code that represents the original size detected by the original sensors. (See "Input
Check Table".)
001 APS Operation Check - -
4303
[APS Min Size (A5/HLT/16K)]
Specifies the result of the detection when the outputs from the original sensors are all OFF.
001
APS Min. Size (A5/HLT/
16K)
*ENG
[0 to 2 / 0 / 1 /step]
0: No Original
1: A5-Lengthwise (16K SEF if 4305 is set to 3)
2: A5-Sideways (16K LEF if 4305 is set to 3)
System Service Mode
291
8