Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 671 / 856

001 Selects F size original setting.
5127 [APS Mode] *CTL [0: Not disabled/ 1: Disabled]
001 This program disables the APS.
5128 [Code Mode With Key/Card Option] *CTL -
001 DFU
5131 [Paper Size Type Selection] *ENG [0: JP (Japan)/ 1: NA / 2: EU]
001
The program selects a paper size system from the following alternatives: the AB system (0),
the LT system (1), and the AF system (2).
5150 [By-Pass Length Setting] *CTL [0: OFF/ 1: ON]
001
Determines whether the transfer sheet from the by-pass tray is used or not.
Normally the paper length for sub scanning paper from the by-pass tray is limited to 600
mm, but this can be extended with this SP to 1260 mm.
5162 [App. Switch Method] *CTL [0: Soft Key Set/ 1: Hard Key Set]
001 This program specifies the switch that selects an application program.
5167
[Fax Printing Mode at Optional]
Enables or disables the automatic print out without an accounting device. This SP is used
when the receiving fax is accounted by an external accounting device.
001
Fax Printing Mode at Optional
Counter Off
*CTL
[0 or 1 / 0 / - ]
0: Automatic printing
1: No automatic printing
5169
[CE Login]
If you will change the printer bit switches, you must ‘log in’ to service mode with this SP before
you go into the printer SP mode.
System Service Mode
315
8