Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 609 / 856

005
Repeat Number: Recovery *ENG [0 to 9 / 0 / 1 time/step]
Not used
006
Repeat Number: Job End *ENG [0 to 9 / 4 / 1 time/step]
Specifies the maximum number of repeats of the toner density adjustment at job end.
0: Disabled, 1 to 3: Repeat number,
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low, and toner is
consumed only when the toner density is too dark.)
6 to 9: Disabled
007
Repeat: Interrupt *ENG [0 to 9 / 0 / 1 time/step]
Specifies the maximum number of repeats of the toner density adjustment during printing.
DFU
008
Toner Supply Coefficient *ENG [0 to 25.5 / 10 / 0.1 sec/step]
Adjusts the time for the toner supply mode when a toner density is detected to be low.
009
Consumption pattern: Bk *ENG [0 to 255 / 5 / 1 time/step]
Specifies the belt mark generating time for checking the black toner density when toner density
is detected to be low at the toner density adjustment.
010
Consumption pattern: M *ENG [0 to 255 / 5 / 1 time/step]
Specifies the belt mark generating time for checking the magenta toner density when toner
density is detected to be low at the toner density adjustment.
011
Consumption pattern: C *ENG [0 to 255 / 5 / 1 time/step]
Specifies the belt mark generating time for checking the cyan toner density when toner density
is detected to be low at the toner density adjustment.
012
Consumption pattern: Y *ENG [0 to 255 / 5 / 1 time/step]
Specifies the belt mark generating time for checking the yellow toner density when toner
density is detected to be low at the toner density adjustment.
013
T1 Bias: Bk *ENG [0 to 80 / 20 / 1 µA/step]
Adjusts the image transfer belt bias for Black.
System Service Mode
253
8