Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 571 / 856

001 Paper Transfer: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step] 003 Paper Transfer: Plain: 1st Side *ENG
005 Separation DC: Plain: 1st Side *ENG
2471
Adjusts the correction to the discharge plate current at the paper leading edge in each mode.
SP2451 is multiplied by these SP values.
• The paper leading edge area can be adjusted with SP2472.
007 Separation DC: Plain: 1st Side *ENG [0 to 400 / 100 / 5%/step]
2472
[Thin: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
Plain: 154 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
003 Paper Transfer: Plain: 1st Side *ENG
005 Separation DC: Plain: 1st Page *ENG
007 Separation DC: Plain: 1st Side *ENG
2473
[Thin: Trailing Edge Correction] Thin Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode. SP2453 and SP2457 are multiplied by these SP values.
Plain: 154 mm/sec, Fine: 77 mm/sec
• The paper trailing edge area can be adjusted with SP2474.
001 Paper Transfer: Plain: 1st Side *ENG [0 to 400 / 100 / 5%/step]
003 Paper Transfer: Plain: 1st Side *ENG [0 to 400 / 100 / 5%/step]
005 Separation DC: Plain: 1st Side *ENG [0 to 400 / 100 / 5%/step]
007 Separation DC: Plain: 1st Page *ENG [0 to 400 / 100 / 5%/step]
System Service Mode
215
8