Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 589 / 856

003 Paper Transfer: Plain: 1st Side *ENG [0 to 400 / 100 / 5%/step]
2771
Adjusts the correction to the discharge plate current at the paper leading edge in each mode.
SP2751 is multiplied by these SP values.
• The paper leading edge area can be adjusted with SP2772.
005 Separation DC: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
006 Separation DC: Plain: 2nd Side *ENG
007 Separation DC: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
008 Separation DC: Fine: 2nd Page *ENG
2772
[Special 1: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
Plain: 154 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: Plain: 1st Side *ENG [0 to 50 / 0 / 1 mm/step]
005 Separation DC: Plain: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step] 006 Separation DC: Plain: 2nd Side *ENG
007 Separation DC: Plain: 1st Side *ENG
2773
[Special 1: Trailing Edge Correction] Special 1 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2753 and SP2757 are multiplied by these SP values.
Plain: 154 mm/sec, Fine: 77 mm/sec
• The paper trailing edge area can be adjusted with SP2774.
System Service Mode
233
8