Ricoh MPC 2800 AT-C2, Field Service Manual, Page: 643 / 856

006 Set Detection *ENG [0 to 5 / 1 / 0.1 V/step]
007 Without Developer *ENG [0 to 5 / 1.2 / 0.1 V/step]
008 With Developer *ENG [0 to 5 / 1.3 / 0.1 V/step]
009 Serial Number 1 *ENG
[0 to 255 / - / 1 V/step]
010 Serial Number 2 *ENG
011 Adjustment: Vt *ENG [0 to 5 / 3 / 0.1 V/step]
012 Adjustment: Vtref *ENG [0 to 5 / 3 / 0.1 V/step]
013 Adjustment: Vtcnt *ENG [0 to 5 / 4 / 0.01 V/step]
014 Adjustment: Gamma *ENG [0 to 2.55 / 0 / 0.01 mg/cm
2
/kV /step]
015 Adjustment: Vcnt Result *ENG [0 to 9 / 9 / 1 /step]
3800
[Toner Collection Bottle Full Detection]
Displays/ adjusts the toner collection bottle detection settings. These SPs are used for NRS.
001 Condition *CTL [0 to 4 / 0 / 1 /step]
002 Detection Times *CTL [0 to 50 / - / 1 /step]
003 Print Page After Near Full *CTL [0 to 1000 / 0 / 1 sheet/step]
004 Pixel Count After Near Full *CTL [0 to 200000 / - / 1 cm
2
/step]
005 Pixel Count After Replacement *CTL
Displays the pixel counter after replacement of
toner collection bottle.
[0 to 200000 / - / 1 cm
2
/step]
008 Coefficient *ENG [0.5 to 1.5 / 1 / 0.1 /step]
System Service Mode
287
8