DISPLAYED ERROR MESSAGES
If an error occurs, one of the following messages may be displayed. The
message may only be displayed briefly, so if you are watching for errors, stay
by the machine and watch the display.
Display
Required Action
CLOSE COVER
The Printer cover is not closed.
*
Close the cover.
ADD PAPER/
CLEAR COPY
The paper is used up.
*
Add paper.
The paper is jammed in the printer.
*
Remove the jammed paper.
REPLACE
CARTRIDGE
The ink cartridge is almost empty.
*
Replace the ink cartridge.
The ink cartridge is not set correctly.
*
Set the cartridge again.
CLEAR
ORIGINAL
The original is jammed in the feeder.
*
Remove the document.
CHECK AUTO
DIALING
No tones detected on the line during dialing.
*
Press the Stop key and try to redial.
ERROR PRESS
STOP KEY
A communication error has occurred during transmission or
reception.
*
Press the Stop key to return to standby mode. Check
the Error Report.
MEMORY OVER
There is not enough memory to store your fax message.
*
Use a lower resolution.
*
Send the message in several different transmissions.
TOO MANY
DIGITS
The digit you input is over the limit.
*
Try to reinput correctly.
TOO MANY DEST
The memory cannot hold any more telephone numbers.
*
Delete some numbers then try again.
*
Wait until some of the Send Later or other delayed
transmissions waiting in memory have been carried
out, then try again.
ALREADY INPUT
This number is already included in this Group or this
RTI/CSI has already been stored for use with this feature.
162
Summary of Contents for FAX880 MP
