Ricoh FAX880 MP, Operator'S Manual

Page: 144 / 261

BJ mode
When the printer is in BJ mode (Emulation digit 11 is 0), you can set the
Emulation digits to control the following functions.
digit Purpose 0 (OFF) 1 (ON)
1 Do not change this setting.
2 Text Scale mode Disabled Enabled
3 Do not change this setting.
4 Character set Set 1 Set 2
5 to 7 Code page See the following descriptions
8
Automatic carriage return (CR) Normal Line
feed (LF) LF with CR
9 Alternate Graphics Mode (AGM) Disabled Enabled
10
Buffer size Input: 64KB
Download : 0KB Input: 32 KB
Download: 40KB
11 Printer control mode BJ mode Epson LQ mode
12 Automatic Emulation Disabled Enabled
13 Smoothing Disabled Enabled
Emulation digit 2
This setting determines how many lines fit onto a page by adjusting the line
spacing. If you are using a software application that assumes 66 lines will fit
on each page, set this digit to 1. The printer will reduce the line spacing by a
factor of 14/15, which is from 62 lines per page to 66 lines per page if line
spacing is set to 6 lines per inch (lpi).
Emulation digit 4
When this digit is 0, the printer uses Character Set 1. When this digit is 1,
the printer uses Character Set 2.
Emulation digits 5, 6, 7
These digits allow you to select the following code page tables.
USIN
G THE
P
R
INTER
CUSTOMIZING THE PRINTER
133