Ricoh FAX880 MP, Operator'S Manual

Page: 29 / 261

3
Press the Yes key.
TRANSMIT OPTIONj
DIAL NEXT FAX NUMBER
4
Either:
❐
Dial another number (Broadcasting).
See the next section : Go to step 2.
❐
Press the Start key.The machine will
scan the document and dial.
SAVING TO MEMORY
F-001 P.01 99%
5
The machine dials, and the line to the
other party is connected.
NOW COMMUNICATING
SET DOC. OR DIAL NO.
NEW YORK OFFICE
SET DOC. OR DIAL NO.
Watch the display. The identification of the other party will appear. If you
have dialed the wrong number, press the Stop key as soon as possible
and start over again.
6
After sending the message, the ma-
chine hangs up automatically.
Transmission Using the Group Key
1
Either:
❐
Place a document into the feeder.
GROUP Y/START
G1 DISTRIBUTOR
❐
Press the Quick Dial 10 (Group
Key). Then enter the group number.
2
Press the Start key.
Programming the Group Key see page 218
Sending the Same Message to Many Destinations
This feature is called Broadcasting. When you are in Memory Transmission
mode, you can send the same message to many destinations (maximum 30
destinations). After dialing the number of the first destination (steps 2 & 3
above), dial another number. Repeat this procedure until you have dialed all
the numbers, then press the Start key.
SCANNING QUICKLY
(Memory Transmission)
18