Ricoh FAX880 MP, Operator'S Manual

Page: 146 / 261

CHANGING AN EMULATION SWITCH SETTING
1
Press the Function key and
6,2,2,2,2,6,4 using the ten keypad, then
press the Yes key. On the bottom line of
the display the current settings of digits
1 to 9 are shown in sequence from the
left to right.
1 9 1-9/Y/j k
100010000
2
To change the required setting, press a
number from 2 to 9 using the ten key-
pad corresponding to the digit that you
wish to change. Example: Press 6 using
the ten keypad. The value of the digit 6
changes, in this case from 0 to 1.
1 9 1-9/Y/j k
100011000
3
Press the
k
key. Next, you can set dig-
its 10 to 13.
10 13 0-3/Y/j k
0000
4
This time the current settings of digits
10 to 13 are shown in sequence from
left to right. To change digit 10, use the
0 key on the ten keypad. Similarly, to
change digit 11 use the 1 key , digit 12
the 2 key and digit 13 the 3 key using
the ten keypad.
5
Finish: Press the Yes key, then the Function key.
USIN
G THE
P
R
INTER
135