6
Connect the machine:
5-1) Connect the power cord.
5-2) Connect the telephone line to the upper
socket labeled "Line".
7
Before you start using the machine, refer to the
section entitled "Some Items Must be Programmed
First" in the Operator’s Manual.
Attaching The Handset
1
First, attach the handset holder to its bracket using the two screws, as
shown in the diagram opposite. (Be careful not to screw them in too tightly.)
NOTE: Use a coin to screw them in.
2
Fit the cover over the heads of the screws.
3
Install the bracket on the machine (see the diagram opposite).
4
Rest the handset in its holder.
5
To avoid slack wire hanging at the rear of the machine, slot the handset lead
into the holder as shown.
6
Plug the handset jack into the lower socket labeled "TEL" on the side of the
machine
Setting Paper Thickness
You use the paper thickness lever to adjust the distance
between the print head and the paper to accommodate
different paper thicknesses. This distance is called the print gap.
❐
To the left for printing on normal paper using Ink Cartridge Type 120 Black.
❐
To the center for printing using Ink Cartridge Type 125 Color .
Connecting the Computer
1
Turn off the computer.
2
Disconnect the power cord from the printer.
3
Power Supply:
115V,60HZ
Telephone Line
Summary of Contents for FAX880 MP
