Ricoh FAX880 MP, Operator'S Manual

Page: 28 / 261

4
Press the Start key.
NOW COMMUNICATING
A4 ----->A4 TRANSMIT
NEW YORK OFFICE
A4 ----->A4 TRANSMIT
5
The machine dials and the line to the other party is connected. While it is
dialing, the number that you dialed is displayed (or if you used Quick
Dial or Speed Dial, the Quick Dial or Speed Dial Label stored for that
number is displayed). After transmission the machine will return to
standby mode.
SCANNING QUICKLY
(Memory Transmission)
1
Make sure that the machine is in
standby mode. If the display does not
look as right, then press the Memory
key.
MEM.TX 100% 10:00AM
SET DOC. OR DIAL NO
2
Follow both steps in any order.
❐
Dial in one of the following ways:
TRANSMIT Y/STRT
3104719266
a) Ten Keypad b) Quick Dial c) Speed Dial. d) Other
Several destinations :
GROUP DIAL
Just one location
:
HANDSET
If your machine is behind a PBX, dial the access code, then a pause, then the telephone number. For international numbers,
press the Pause key after entering the country code.
❐
Carefully place your fax message
face down into the document feeder.
The machine will take it in. MEM.TX OPTIONk
DIAL FAX NUMBER
NOTE: If you do not set the document carefully you can reset the ma-
chine to its default. Check after that the display still looks as
above.
BASIC F
A
X
OPERA
TI
ON
SCANNING QUICKLY
(Memory Transmission)
17