Ricoh FAX880 MP Operator'S Manual Download Page 159

Page: 159 / 261

Install the new cartridge [G].

❐

Fit tab [H ] cover slot [J]

❐

Push the cartridge in.

❐

Push the down lever [I].

NOTE:

❐

Do not touch any of the copper
wiring inside the machine.

❐

Do not shake the cartridge:
ink may come out.

❐

Do not touch the print head [L]
on the ink cartridge.

❐

Do not touch the terminals [K]
on the cartridge.

Close the front cover.
NOTE: Ensure the front cover is fully closed by

pushing down the center firmly until it
clicks into place. If you push the sides, it
will not lock into place and "

COVER

" report will appear on the screen.

Attach the document tray and the copy tray.

The machine will start Head Cleaning
automatically. The machine returns to
standby mode after cleaning has ended.
It takes more than 30 seconds.

NOTE:

❐

If you keep the front cover open for more than ten minutes, the
ink cartridge will move to its home position.

❐

After replacing the cartridge a test pattern is automatically
printed. If you wish to switch this off, see page 203.

REPLACING THE INK CARTRIDGE

148

Summary of Contents for FAX880 MP






































































































































































































































































Search results

Summary of Contents for FAX880 MP

Reviews:

Related manuals for FAX880 MP

Brands by name

Popular brands

Ricoh FAX880 MP, Operator'S Manual

Search results

Summary of Contents for FAX880 MP

Reviews:

Related manuals for FAX880 MP

Brands by name

Popular brands