Ricoh FAX880 MP Operator'S Manual Download

Page: 18 / 261

❐

Avoid contact with diazo photosensitive paper.

❐

When a copy gets wet, dry it by wiping it gently with a soft cloth or tissue.

❐

Do not scratch or rub it with hard materials.

❐

Do not copy with a mercury lamp diazo copier.

❐

Make a photocopy if the information is to be kept for a long time.

❐

Do not store copies in vinyl file folders.

INK CARTRIDGES

❐

Ink Cartridge Type 120 Black is recommended for the best black
performance. For color printing, Ink Cartridge Type 125 Color is
recommended.

❐

Store in a cool, dark place.

❐

Keep out of reach of children. The ink in the cartridge contains isopropyl
alcohol 67-63-0.

❐

Never store where it may be exposed to heat.

❐

Do not unpack a cartridge until you need to use it.

❐

Do not touch the print head : This is a precision
component.

❐

Do not lay heavy objects on the ink cartridge.

❐

Do not remove the ink cartridge from the printer
unless you have to; ink inside the cartridge will dry
out and the cartridge will not disperse ink.

❐

For best results, change the cartridge at least once a
year.

❐

Do not attempt to refill ink cartridges. Printouts with
refilled cartridges may be of poor quality.

❐

Do not disassemble ink cartridges. Ink may be spilled on your hands or
clothes.

❐

Do not subject cartridges to shock or vibration; ink may spill out of the
cartridge.

❐

Do not touch the aluminum plate on the cartridge.

❐

Do not replace the protective seal and head cap.

❐

If you unwrap a cartridge and do not install it, store it in the ink cartridge
container.

TRODUCTION

GENERAL PRECAUTIONS

Summary of Contents for FAX880 MP






































































































































































































































































Search results

Summary of Contents for FAX880 MP

Reviews:

Related manuals for FAX880 MP

Brands by name

Popular brands

Ricoh FAX880 MP, Operator'S Manual

Search results

Summary of Contents for FAX880 MP

Reviews:

Related manuals for FAX880 MP

Brands by name

Popular brands