Horizon Fitness CRF-362 User Manual Download

Page: 1 / 122

Crease and Folder

CRF-362

Important Information

This manual is designed to help you to operate and maintain the CRF-362.

Please read, understand and keep this manual in a safe and convenient

place.

Do not operate the CRF-362 until you read and understand the instructions

in this manual.

Horizon International Inc. shall not be liable for incidental consequential

damages resulting from: improper or inadequate maintenance by the cus-

tomer, unauthorized modification or misuse, or operation outside of the

environmental specifications for the product.

Horizon International Inc. pursues a policy of continuing improvement in

design and performance of the product. Therefore, the product design and

specifications are subject to change without prior notice and without our

legal obligation.

All rights are reserved. No part of this manual may be photocopied, repro-

duced or translated to another language without the prior written consent

of Horizon International Inc.

UM203090-11(000)

150722/CRF-362/11E/CF,TF,CY/IDCS5.5/ICS5/PXI

*UM203090*

Summary of Contents for CRF-362



























































































































Search results

Summary of Contents for CRF-362

Reviews:

Related manuals for CRF-362

Brands by name

Popular brands

Horizon Fitness CRF-362, User Manual

Search results

Summary of Contents for CRF-362

Reviews:

Related manuals for CRF-362

Brands by name

Popular brands