Ricoh D0C8, Service Manual

Page: 744 / 1647

Jam Detection
D0CA/D0C9/D0C8/D0CB 6-170 SM
Cause
code
Cause of jam Late
Jam
Lag
Jam
Stay
Jam
Display
code
on the registration roller (when paper is fed from
optional paper feed units).
017 Cannot make the paper slack for skew adjustment
on the registration roller (when paper is fed from
1st tray). A
018 Fusing entrance sensor (S3) B
019 Fusing exit sensor (S8) C
020 Paper exit sensor (S7) C
021 1-Bin Tray Exit Sensor *3 C
025 Duplex exit sensor (S2) Z
026 Duplex entrance sensor (S1) Z
050 Registration sensor (S32) (When printing in
duplex mode) B
052 Paper transport sensor 1 (S1) Y1
053 Paper transport sensor 2 (S1) Y2
054 Paper transport sensor 3 (S1) Y3
055 Registration sensor (S32) (When paper is fed
from bypass tray) B
056 Registration sensor (S32) (When paper is fed
from optional paper feed units) B
057 Registration sensor (S32) (When paper is fed
from 1st tray) B
060 Paper exit sensor (S7) C
061 1-Bin Tray Exit Sensor
*3
C
065 Duplex exit sensor (S2) Z
066 Duplex entrance sensor (S1) Z
230 The report notifying completion of the paper
delivery to the finisher is missing.
*4
R
240 Internal finisher entrance sensor (S45)
*4
R
241 Internal finisher entrance sensor (S45) *4 R
242 Internal finisher paper exit jam *4 R
243 Internal finisher jogger motor (M20) jam *4 R
244 Internal finisher shift roller motor (M19) jam
*4
R
245 Internal finisher gathering roller motor (M18) jam
*4
R
246 Internal finisher exit guide plate motor (M21) jam *4 R
247 Internal finisher tray lift motor (M22) jam *4 R