Ricoh D0C8, Service Manual

Page: 941 / 1647

System Maintenance
SM 8-51 D0CA/D0C9/D0C8/D0CB
Sm
ar
t
O
pe
ra
tio
n
Pan
el
8.3.8 SOFTWARE UPDATE
Updating the Smart Operation Panel
•
In the case of models provided with package firmware only, updates for the Smart
Operation Panel and applications are also provided via package firmware. For details,
see "
Firmware Update (Removable Media) ".
There are three methods to update the Smart Operation Panel. The method is different
depending on what you want to update.
1. Installation/update from a media
2. Installation/update from the eDC Server
3. Installation/update from Application Site
Update method Features Control
panel
firmware
Applications
Installation/update
from a media Installation or update is possible in the
following two ways.
1. Applications
• Use the installation screen in the
control panel’s service mode to
update applications.
• You can install or update multiple
applications at once.
• You can also uninstall an application.
2. Package firmware (SD card or USB flash
drive)
Refer to ”
Firmware Update (Removable
Media)
”.
Yes Yes
Installation/update
from the eDC Server Install or update applications directly from the
eDC Server.
This method is mainly for paid applications. A
product key is required when an application is
installed for the first time.
*The update procedure is the same as when
updating the Smart Operation Panel application
already released. No Yes
Installation/update
from Application Site Installation and Updating of applications and
firmware update can be done from Application Yes* 1 Yes