Ricoh D0C8, Service Manual

Page: 1548 / 1647

Bit Switches – 2
SM 73 D0CK
Printer Switch 07 (SP No. 1-103-008)
No Function Comments
0 Not used. Do not change the settings.
1 Selects the 95% reduced
printing function for letter
size.
0:OFF Not reduced printing
1:ON Only when printing letter size, performs 95% reduced printing
of the entire image (in both of main and sub directions) Report
printing and printing from the bypass tray are excluded.
2-
3
Not used. Do not change the settings.
4 Receiver name printed on
the transmission result
report
Selects the printing target on the transmission result report.
0: All receivers
1: Printing only receivers which have received fax transmission.
5-
7
Not used. Do not change the settings.
Printer Switch 08 - Not used (do not change the settings)
Printer Switch 09 - Not used (do not change the settings)
Printer Switch 0A - Not used (do not change the settings)
Printer Switch 0B - Not used (do not change the settings)
Printer Switch 0C - Not used (do not change the settings)
Printer Switch 0E (SP No. 1-103-015)
No Function Comments
0* Paper size selection priority
0: Width
1: Length
0: A paper size that has the same width as the received data is
selected first.
1: A paper size which has enough length to print all the
received lines without reduction is selected first.
1* Paper size selected for
printing A4 width fax data
0: 8.5" x 11" size
1: A4 size
This switch determines which paper size is selected for
printing A4 width fax data, when the machine has both A4 and
8.5" x 11" size paper.
2 Page separation
0: Enabled
1: Disabled
1: If all paper sizes in the machine require page separation to
print a received fax message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a cassette, the machine
automatically prints the fax message.
3- Printing the sample image on "Same size" means the sample image is printed at 100%,