Ricoh D0C8, Service Manual

Page: 681 / 1647

SC8xx: Overall System
SM 6-107 D0CA/D0C9/D0C8/D0CB
Tr
ou
bl
es
ho
ot
in
g
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
When you do the above, the following information will be initialized.
• Sender’s mail text
• Default sender name/password (SMB/FTP/NCP)
• Administrator mail address
• Scanner delivery history
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
SC874-05 D
Delete All Error (Delete Data Area) : Read error
SC874-06 D Delete All Error (Delete Data Area) : Write error
SC874-09 D Delete All Error (Delete Data Area) : No response from HDD
SC874-10 D Delete All Error (Delete Data Area) : Error in Kernel
SC874-12 D
Delete All Error (Delete Data Area) : No designated partition
SC874-13 D Delete All Error (Delete Data Area) : No device file
SC874-14 D Delete All Error (Delete Data Area) : Start option error
SC874-15 D Delete All Error (Delete Data Area) : No designated sector number
SC874-16 D
Delete All Error (Delete Data Area) : failure in performing hdderase
SC874-41 D Delete All Error (Delete Data Area) : Other fatal errors
SC874-42 D Delete All Error (Delete Data Area) : End by cancellation
SC874-61
to 65 D Delete All Error (Delete Data Area) : library error
SC874-66 D
Delete All Error (Delete Data Area) : Unavailable
SC874-67 D Delete All Error (Delete Data Area) : Erasing not finished
SC874-68 D Delete All Error (Delete Data Area) : HDD format failure (Normal)
SC874-69 D Delete All Error (Delete Data Area) : HDD format failure (Abnormal)
SC874-70 D
Delete All Error (Delete Data Area) : Unauthorized library
SC874-99 D Delete All Error (Delete Data Area) : other errors
An error occurred while data was being erased on HDD or NVRAM.
•
Error detected in HDD data delete program
•
Error detected in NVRAM data delete program
•
The “Delete All” option was not set
•
Turn the Main Power Switch (SW1) OFF and back ON, and then
execute "Erase All Memory" in UP mode again. (However, if there is a
defective sector or other problem with the hard disk, the error will persist
even after trying the above.)
•
If the "Delete All" option is not installed when this error occurs, install
the option.