Ricoh D0C8, Service Manual

Page: 1471 / 1647

Security Features
SM Appendices
4-15 D0CA/D0C9/D0C8/D0CB
A
p
p
e
n
d
ic
e
s
So
ftw
a
re
C
o
n
fi
g
u
ra
ti
o
n
The most restrictive result of combining these three configurations will take priority. So for
example:
Bit 0 = 0
Bit 1 = 1
Bit 7 = 1
As Bit 1 = 1 is the most restrictive of the three, it will take presedence over the other two and
only administrators will be able to access the DS via WIM.
•
In order for SP5-885-020 to have any effect, the Document Server must be enabled
(SP5-967-001=0). For information about SP5-967-001, refer to Disabling the
Document Server using System SP5-967-001.
•
Access to the entire "Job" menu can be restricted using SP 5-888-001. For details,
refer to Use of SP 5-888-001 to restrict access to the "Job" menu on WIM.
4.4.3 USER AUTHENTICATION FOR SPECIFIC MFP
APPLICATIONS
The SP5-420 settings enable/disable User Authentication for specific MFP applications.
SP 5-420 User Authentication Value (Default: 0)
SP 5-420 User Authentication Value (Default: 0)
SP5-420-001 Copy 0 (ON) 1 (OFF)
SP5-420-011 Document Server
SP5-420-021 Fax
SP5-420-031 Scanner
SP5-420-041 Printer
1.
Enable User Authentication for the device as a whole:
User Tools > System Settings > Administrator Tools > User Authentication Management
2.
Use the SP5-420 settings to specify the applications to which User authentication is to
apply.