Ricoh D0C8, Service Manual

Page: 868 / 1647

Energy Save
D0CA/D0C9/D0C8/D0CB 7-116 SM
7.20 ENERGY SAVE
7.20.1 ENERGY SAVER MODES
Customers should use energy saver modes properly, to save energy and protect the
environment.
The area shaded grey in this diagram represents the amount of energy that is saved when the
timers are at the default settings. If the timers are changed, then the energy saved will be
different. For example, if the timers are all set to 60 min., the grey area will disappear, and no
energy is saved before 60 min. expires.
Setting Items that are Related to Energy Saving
The user can set these timers with [Settings] (System Settings > Date/Time/Timer > Timer)
[Settings] (System Settings > Date/Time/Timer > Timer > Sleep Mode Timer)
After a specified period has passed, or [Energy Saver] is pressed, the machine enters Sleep
mode in order to conserve energy. Specify the time to elapse before Sleep mode.
Default: [1 minute(s)]
Sleep Mode Timer may not work when error messages appear.
Depending on which Embedded Software Architecture application is installed on it, the machine
might take longer than indicated to enter Sleep mode.
[Settings] (System Settings > Date/Time/Timer > Timer > Fusing Unit Off Mode (Energy
Saving) On/Off)
Specifies whether Fusing Unit Off mode is enabled or not.