Rice Lake Legend 480-2A, Technical Manual

Page: 8 / 85

Introduction 1
1.0 Introduction
This manual is intended for use by service technicians responsible for installing and servicing 480 digital weight
indicators. This manual applies to indicators using Version 1.05 of the 480 software.
Configuration and calibration of the indicator can be accomplished using the Revolution
®
configuration utility or
the indicator front panel keys. See Section 3.2 on page 32 for information about configuration methods.
Manuals can be viewed or downloaded from the Rice Lake Weighing Systems website at
www.ricelake.com .
An Operation Manual is available on the website, that provides basic operating instructions for users.
Warranty information can be found on the website at
www.ricelake.com/warranties
1.1 Safety
Safety Symbol Definitions
Indicates a potentially hazardous situation that, if not avoided, could result in serious injury or death, and
includes hazards that are exposed when guards are removed.
Indicates information about procedures that, if not observed, could result in damage to equipment or
corruption to and loss of data.
Safety Precautions
Do not operate or work on this equipment unless you have read and understand the instructions and
warnings in this manual. Failure to follow the instructions or heed the warnings could result in injury or
death. Contact any Rice Lake Weighing Systems dealer for replacement manuals. Proper care is your
responsibility.
General Safety
Failure to heed may result in serious injury or death.
Some procedures described in this manual require work inside the indicator enclosure. These procedures are to be
performed by qualified service personnel only.
Do not allow minors (children) or inexperienced persons to operate this unit.
Do not operate without the enclosure completely assembled.
Do not use for purposes other than weight taking.
Do not place fingers into slots or possible pinch points.
Do not use this product if any of the components are cracked.
Do not exceed the rated specification of the unit. See Section 9.17 on page 75.
Do not make alterations or modifications to the unit.
Do not remove or obscure warning labels.
Do not submerge.
Before opening the unit, ensure the power cord is disconnected from the outlet.
WARNING
Important
WARNING