Rice Lake Legend 480-2A, Technical Manual

Page: 38 / 85

User Menu Setup 31
3.1.7 MISC Menu
Figure 3-8. Misc. Menu
Parameter Choices Description
POWER AUTO The power up functionality depends on whether the battery option is installed:
• If the battery option is not installed, the indicator turns on automatically when connected
to AC power. It turns off by disconnecting the AC power or by pressing the power key.
• If the battery option is installed, and CPU Jumper 4 is connected, the indicator turns on
automatically when connected to AC power. It turns off by disconnecting the AC power or
by pressing the power key.
This configuration is not recommended due to increased
leakage current from the battery when the indicator is turned off.
• If the battery option is installed, and CPU Jumper 4 is disconnected, the indicator only
turns on and off by pressing the power key.
MANUAL Indicator powers On/Off by pressing Power key.
BKLGHT OFF
ON
AUTO
Allows control of the LCD backlight.
OFF – backlight always off.
ON – backlight always on.
AUTO - backlight will turn off after the configured amount of time, if no buttons are pressed
and there is no change in the weight. Once either of these occurs, the backlight will turn on.
Auto time Options: 10 sec, 30 sec, 1 min, 5 min,10 min.
BAT LEVEL Allows reading the battery level in mV units.
If there is not a battery option installed, NOBATT will display.
When the battery is charging, CHRNG will display.
Table 3-8. MISC Menu Parameters
MISC
POWER BKLGHT BAT
OFF
ON
AUTO
10 SEC
30 SEC
1 MIN
5 MIN
10 MIN
BAT LEVEL
AUTO
MANUAL
MENU CONFIG FORMAT CALIBR PROGRM DIG IN ALGOUT PASWRD USBMEM TEST
Note