Rice Lake Legend 480-2A, Technical Manual

Page: 41 / 85

34 480 Legend Series
3.2.2 Adaptive Filter and Rolling Filter Sub-menu Parameters
Figure 3-10. Adaptive Filter and Rolling Averaging Filter Sub-menu
OVRLOA FS+2%
FS+1D
FS+9D
FS
Overload – determines the point at which the display blanks and an out-of-range error
message is displayed. Maximum legal value varies depending on local regulations.
DSPRAT 0.1SEC
0.25 SEC
0.5 SEC
0.75 SEC
1 SEC
NONE
Display rate – sets the update rate for displayed values. Values are in seconds (SEC).
No display filtering – the display is updated at up to the A/D sample rate.
SMPRAT 5HZ
10HZ
20HZ
40HZ
A/D Sample rate – selects measurement rate, in samples per second, of the
analog-to-digital converter. Lower sample rate values provide greater signal noise immunity.
DIGFIL ADPFIL
ROLFIL
OFF
Adaptive Filter – selects the adaptive digital filter. See Figure 3-10.
Rolling Average Filter - selects the rolling average filter. See Figure 3-10.
OFF- Disables the digital filter.
See Section 9.11 on page 68 for more information on Digital Filtering.
TAREFN
BOTH
Tare function – enables or disables push-button and keyed tares.
Both push-button and keyed tares are enabled
NOTARE No tare allowed (gross mode only)
PBTARE Push-button tare enabled
KEYED Keyed tare enabled
Parameter Choices Description
Table 3-10. Configuration Menu Parameters (Continued)
CONFIG FORMAT CALIBR PROGRM DIG IN ALGOUT PASWRD USBMEM MENU TEST
ADPFIL
AFTHRH
000002
AFSENS
LIGHT
MEDIUM
HEAVY
2
4
8
16
32
64
1
RFSTG3
2
4
8
16
32
64
1
RFSTG2
2OUT
4OUT
8OUT
16OUT
32OUT
64OUT
128OUT
RFSENS
NONE
2 dd
100 dd
50 dd
20 dd
10 dd
5 dd
200 dd
250 dd
RFTHRH RFSTG1
2
4
8
16
32
64
1
ROLFIL