Rice Lake Legend 480-2A, Technical Manual

Page: 62 / 85

The EDP Command Set 55
Ethernet Functionality
The Ethernet port works in COMMAND mode meaning that it is possible to send any EDP command to the
indicator and receive a response from the indicator accordingly. It is not possible to print from the port.
Command Description Values
ETH.DHCP Dynamic Host Configuration Protocol
(DHCP) ON – Dynamic allocation of IP address
OFF – Static allocation of IP address
ETH.IPADDRESS Source IP address, a 4 field value The range of each field is 0-255
(0-255).(0-255).(0-255).(0-255)
ETH.NETMASK SUBNET mask, a 4 field value The range of each field is 0-255
(0-255).(0-255).(0-255).(0-255)
ETH.DEFAULTGATEWAY Default gate way, a 4 field value Range of each field is 0-255
(0-255).(0-255).(0-255).(0-255)
ETH.MAC Returns the MAC address, read only 6 fields, 8 bit each, in hexadecimal base
ETH.SERVER.PORT The ethernet server TCP port 1-65535
ETH.SERVER.ECHO Sets the Server Port Echo ON, OFF
ETH.SERVER.TRIGGER Server Port Trigger DEMAND, COMAND, STRLFT, STRIND
ETH.SERVER.TIMEOUT Server Inactivity Timeout in seconds 0-65535
ETH.SERVER.TERMIN Server Line Termination CR or CR/LF
ETH.SERVER.SFMT Server Stream Format STR-1, STR-2, STR-3, STR-4, STR-5
ETH.SERVER.EOLDLY Server End of Line Delay 0-255
ETH.CLIENT.REMOTESERVERIP Client Remote Server IP Address Range of each field is 0-255
(0-255).(0-255).(0-255).(0-255)
ETH.CLIENT.REMOTESERVERPORT Client Remote Server TCP Port number 1-65535
ETH.CLIENT.TRIGGER Client Port Trigger DEMAND, COMAND, STRLFT, STRIND
ETH.CLIENT.TIMEOUT Client Inactivity Timeout in seconds 0-65535
ETH.CLIENT.TERMIN Client Line Termination CR or CR/LF
ETH.CLIENT.SFMT Client Stream Format STR-1, STR-2, STR-3, STR-4, STR-5
ETH.CLIENT.EOLDLY Client End of Line Delay 0-255
ETH.CLIENT.ECHO Sets the Client Echo ON, OFF
Table 6-12. Ethernet Commands
Command Description Default Values
GFMT Gross demand print format string GROSS<G><NL2><TD><NL>
NFMT Net demand print format string GROSS<G><NL>TARE<SP><T><NL>NET<SP2><N><NL2><TD><NL>
ACCFMT Accumulator demand print format string ACCUM <A><NL><DA> <TI><NL>
SPFMT Setpoint print format <SCV><SP><SPM><NL>
Table 6-13. PFORMT EDP Commands
Command Description Values
POWER Determines if indicator automatically powers on
when plugged in or if power key must be pressed.
Read only in Weighing Mode. AUTO
MANUAL
BKLGHT Controls the LCD backlight display.
Read only in Weighing Mode. ON, OFF, AUTO
BKLGHT.AUTO Controls the LCD backlight display auto off time.
Read only in Weighing Mode. 10SEC, 30SEC, 1MIN, 5MIN, 10MIN
BAT Reads the battery level. Read only. Current battery level in millivolts.
USB.DEVICE Select the USB Device. HOST, DRIVE, PRINTER
USB.TRIGGER Set the USB Port Trigger. DEMAND, COMAND
Table 6-14. MISC Commands