Rice Lake Legend 480-2A, Technical Manual

Page: 50 / 85

Configuration Using the Front Panel (Legal for Trade) 43
3.2.8 Password Menu
The PASSW menu is used to edit or set passwords.
Figure 3-16. Password Menu
Enter 999999 to reset password, this will also reset the configuration back to default values.
3.2.9 USBMEM Menu
USBMEM features will be available in future versions.
Figure 3-17.
USBMEM Menu
Table 3-18. USBMEM Menu Parameters
For more information on using a flash drive to load and save configuration settings, see Section 9.8 on
page 66.
Parameter Choices Description
CNFG 0
0 – 999998
Edit configuration password. 0 = no password
If enabled, the configuration password is used for electronic sealing of the
indicator. When configuration password has been entered, the existing
configuration password is required to edit. Entering this menu requires the
SETUP switch to be pressed.
USER 0
0 – 999998
Edit user password. 0 = no password
If enabled, the user password restricts access to the setpoint, serial and print
formatting menus. Once a user password has been entered, the existing user
password is required to edit parameters.
Table 3-17. Password Menu Parameters
Parameter Choices Description
SAVE Save the configuration parameters to a file on a flash drive.
LOAD Load the configuration parameters from a file on a flash drive.
CNFG USER
CONFIG FORMAT CALIBR PROGRM DIG IN ALGOUT PASWRD USBMEM MENU TEST
000000 000000
Note
Note
Important
SAVE LOAD
CONFIG FORMAT CALIBR PROGRM DIG IN ALGOUT PASWRD USBMEM MENU TEST
Note
Note