Rice Lake Legend 480-2A, Technical Manual

Page: 29 / 85

22 480 Legend Series
3.1 User Menu Setup
Press the
Menu
key to access the menu parameters.
The menu key can be pushed while in the weigh mode. The configuration parameters can be accessed by
pressing the setup switch while in the User Menu. See Section 3.2 for configuration setup.
Figure 3-1. Menu Key User Menu
Parameter Choices Description
AUDIT CALIB
CONFIG View audit trail including the time and date of last configuration or calibration.
Options: CNT, TIME, DATE
TARE 0 View the Tare value.
UNITID 0 – 999999 View and edit the Unit ID (up to a 6 digit number)
ACCUM VIEW
TIME
DATE
PRINT
CLR Y View the current accumulator value.
View the time and date of the last accumulation.
Print or clear the accumulator data.
TIMDAT
TIME
DATE
View/set time and date as currently programmed in the indicator.
See Section 1.8.13.
Format date as
MMDDYY, DDMMYY, YYMMDD or YYDDMM.
SETPNT BATCHG
SETPNT1-8 See Section 3.1.1.
SERIAL COM-1
COM-2
STREAM Configure serial ports.
See Section 3.1.2.
ETHNET DHCP
IPADR
NETMSK
DFTGWY
MAC
SERVER
CLIENT Configure optional Ethernet ports.
See Section Section 3.1.3.
USB DEVICE
TRIGER Configure optional USB port.
See Section 3.1.4.
Table 3-1. Menu Key Parameters
Note
SETPNT PFRMAT MISC
TARE
0
AUDIT
CALIB
CNT
TIME
DATE
CONFIG
CNT
TIME
DATE
UNITID
000000
TIMDAT
TIME
DATE
ACCUM
TIME
DATE
VIEW
PRINT
CLR Y
MENU CONFIG FORMAT CALIBR PROGRM DIG IN ALGOUT PASWRD USBMEM TEST
VERS
SERIAL
ETHNET USB
See
Figure 3-2
See
Figure 3-3
See
Figure 3-4
See
Figure 3-5
See
Figure 3-6
See
Figure 3-8
See
Figure 3-7