Rice Lake Legend 480-2A, Technical Manual

Page: 30 / 85

User Menu Setup 23
3.1.1 Setpoint Menu
For more information on setpoints, see Section 8.0 on page 59.
Figure 3-2. Setpoint Setup Menu
PFRMAT GFMT
NFMT
ACCFMT
SPFMT View or configure the print format used for gross, net ticket, accumulator and setpoint
print tickets. See Section 7.0 on page 57 for more information.
See Section 3.1.5.
VERS FIRMW
LR Displays the firmware and legally relevant firmware currently installed.
MISC POWER
BKLGHT
BAT Set miscellaneous parameters, see Section 3.1.7.
Parameter Choices Description
SETPT1-8 USER
SUPVSR
Setpoint options that do not require a user password, see sub-menu below.
Setpoint options that require a user password, see sub-menu below.
BATCHG OFF
AUTO
MANUAL
Set to OFF batching is disabled. Set to AUTO or MANUAL to allow a batch sequence to run.
MANUAL requires a batch start signal (BATSTRT digital input or BATSTART serial command)
before the batch sequence can run. AUTO allows batch sequences to repeat continuously,
after receiving a single batch start signal.
Table 3-2. Setpoint Setup Menu Parameters
Parameter Choices Description
Table 3-1. Menu Key Parameters (Continued)
TIMDAT ACCUM SERIAL SETPNT ETHNET
... ...
BATCHG SETPT1-8
USER
000000
PREACT
SUPVSR
CONFIG FORMAT CALIBR PROGRM DIG IN ALGOUT PASWRD USBMEM MENU TEST
AUTO
OFF
MANUAL
000000
VALUE
OFF
ON
ENABLE
OFF
ON
PUSHAC
OFF
ON
PUSHPR
OFF
ON
WAITSS
HIGHER
LOWER
TRIP KIND
OFF
GROSS
NET
-GROSS
-NET
DELAY
OFF
ON
PUSHTR
000000
HYSTER
OFF
ON
BATSEQ
NONE
1-8
DIGOUT