Rice Lake Legend 480-2A, Technical Manual

Page: 33 / 85

26 480 Legend Series
Parameter Choices Description
COM-1 TRIGER
BAUD
BITS
SBITS
TERMIN
EOLDLY
ECHO
PRNMSG Specifies settings for COM-1.
COM-2 TRIGER
BAUD
BITS
SBITS
TERMIN
EOLDLY
ECHO
PRNMSG
STRUR Specifies settings for COM-2.
STREAM Specifies the operating mode of the indicator. See Section 9.4 on page 65.
NONE Indicator operates normally, COM-2 will not stream, even if the TRIGER is set to a streaming
parameter (STR1-5)
LOCAL Indicator operates normally, data streaming occurs on COM-2 if the TRIGER is set to stream
data (STR1-5)
REMOTE Indicator acts as a Serial Data scale, displaying values based on a received steam of Serial
Data into COM-2. It also sends keypress commands back through COM-2 to the Local
indicator.
Submenus COM-1 and COM-2
TRIGER
(COM-1) Specifies the ports mechanism for triggering a transmission of data.
DEMAND Demand port – printing is performed by pressing the Print key or when a KPRINT EDP
command is received. This port will also allow operation and EDP commands.
PRN Printer Port – printing is performed by pressing the Print key. The port does not allow
operation of EDP commands.
NONE Port is inactive.
COMAND Command port – allows operation of EDP commands, but will not print.
TRIGER
(COM-2) NONE Port is inactive.
PRN Printer Port – Printing is performed by pressing the Print key. The port does not allow
operation of EDP commands.
STR1 Port is used to transmit a continuous stream of data according to RLWS stream format.**
STR2 Port is used to transmit a continuous stream of data according to Toledo8142 stream
format.*
STR3 Port is used to transmit a continuous stream of data according to Cardinal738 stream
format.*
STR4 Port is used to transmit a continuous stream of data according to Weightronix WI-120
stream format.*
STR5 Port is used to transmit a continuous stream of data according to consolidated stream
format.*
*STREAM must be set to local to enable streaming.
See Section 9.3 on page 62 for more information on Stream formats.
Com-2 streams simultaneously on both the RS-232 and 20mA outputs.
BAUD 9600
19200
38400
1200
2400
4800
Baud rate. Selects the transmission speed of data.
BITS 8NONE
7EVEN
7ODD
Selects number of data bits and parity of data.
Table 3-3. Serial Menu Parameters
Note