Rice Lake Legend 480-2A, Technical Manual

Page: 15 / 85

8 480 Legend Series
1.8.11 Enter New Unit ID
1. Press .
2. Press to
AUDIT
.
3. Press until display reads
UNIT ID
.
4. Press to view the current value.
5. Edit the value using the following method; or with the 480 PLUS, use the keypad. See Section 1.7 on page 4.
• Press or to select the digit.
• Press or to increment or decrement the value.
6. Press when the value is correct.
7. Press repeatedly to return to weighing mode.
1.8.12 Display Accumulator
1. Press .
2. Press to
AUDIT
.
3. Press until display reads
ACCUM
.
4. Press to display
VIEW
.
5. Press or to select desired parameter (
VIEW, TIME, DATE, PRINT, CLR Y
).
• For
VIEW
,
TIME
or
DATE
, press to view the value. Press or to return to selected parameter.
• To
PRINT
or
CLEAR
, press , then press to print or clear the accumulator. Press to return to
selected parameter
6. Press repeatedly to return to weighing mode.
See Section 3.1 for the accumulator menu structure.
If the accumulated value exceeds 999999, display shows EE ACC. The value will still be correct and will print
correctly up to 1,000,000,000.
1.8.13 Display or Change Time and Date
To set the date and time:
1. Press .
2. Press to
AUDIT
.
3. Press until display reads
TIMDAT
(Time/Date).
4. Press and select time or date with or .
5. Press to view the current setting.
6. To edit the value of the time, in 24 hour or 12 hour format (hh.mm.ss), use the following method.
• Press or to select hours, minutes, or seconds – the selected value will be flashing
• Press or to increment or decrement the value.
7. Press when the value is correct.
Use the same procedure to enter the date in the same format configured for the indicator.
See Section 3.2.5 for available formats.
8. Press repeatedly to return to weighing mode.
The time and date are backed up with an internal battery. If the main power is interrupted, time and date will
not be lost.
When in 12 hour format, the PT LED indicates pm setting.
MENU
TARE
MENU
TARE
TARE
Note
MENU
TARE
Note