INTERFACE SPECIFICATIONS
SeaBat 8160
Operator‟s Manual
Page 67
October 6, 2011
Version 5
C.3.1.28 Projector
This message selects the projector type.
Syntax:
*PROJ,N<CR><LF>
Parameters:
N = 0: Steer 1.5
N = 1: Steer 3.0
N = 2: Steer 4.5
N = 3: Steer 6.0
N = 4: Steer Test
N = 5: Scan Test
Example:
*PROJ,0<CR><LF>
For a SeaBat 8160, this example selects Steer 1.5.
NOTE
The projector selection varies for different
SeaBat™ models. This setting will
only apply to the SeaBat
™
model for which this manual was written.
C.3.1.29 Pitch Stabilization
This message sets pitch stabilization mode.
Syntax:
*PSTB,N<CR><LF>
Parameters:
N = 0: Not Stabilized.
N = 1: Stabilize using the most recent value from motion sensor.
N = 2: Stabilize using a motion prediction.
Example:
*PSTB,2<CR><LF>
Sets pitch-stabilization to mode 2.
